Have an Old Split AC You No Longer Need?
Find out whether it has resale value — or is better suited for parts recovery and recycling
Before leaving it unused or sending it directly for scrap, find out whether the unit may have resale value or is better suited for parts recovery and recycling. ScrapKabadi helps customers enquire about selling old, used, damaged and nonworking air conditioners.
A split AC consists of more than one component and its value depends on the condition of the complete system. A working unit may be suitable for resale, while an older AC with significant faults may be more appropriate for component recovery or scrap.
Whether you are replacing a split AC at home, clearing equipment from a rented property, or removing several units from a commercial building, share the equipment details to discuss the available options.
Table of Contents
Jump to any section on this page.
Sell Your Old Split AC Instead of Leaving It Unused
An air conditioner can become unwanted for several reasons — upgrading to a newer model, moving to another property, renovating a room, or replacing a unit that no longer cools properly.
Whatever the reason, an unused split AC does not necessarily need to remain stored indefinitely. Its possible resale or scrap value can be assessed according to its condition and components.
You can enquire about a split AC that is still working, an older model that has been replaced, a unit with a compressor fault, an AC that does not start, or equipment that has already been removed from the wall.
Describe the AC Accurately
- If it works — mention that clearly.
- If it has a known problem — explain what you know.
- Don’t assume the entire unit has no value.
- Indoor + outdoor — state whether both are available.
- Installed or removed — this affects collection.
- Quantity — one unit or several.
ScrapKabadi can review the information provided and discuss the relevant selling options, subject to the available service arrangements.
Split AC Resale or Scrap — Which Option Is Suitable?
Not every old split AC should automatically be treated as scrap. Some units may still be usable, while others may have more value through their components or recoverable materials. Resale value and scrap value are assessed differently.
Split AC Resale
A working split AC may be considered for resale if its age, model, condition and overall usability make it suitable for another user. The assessment may consider whether the unit starts correctly, cools effectively, has both indoor and outdoor units available, and whether major components appear complete.
Brand and model can influence resale potential — however, a recognised brand does not guarantee a particular price, especially when the unit is old, damaged or incomplete.
Split AC Scrap
An AC that is severely damaged, nonfunctional or unsuitable for reuse may be assessed for parts recovery or scrap. A split AC contains a combination of metal, electrical and mechanical components — recoverable materials may include copper, aluminium and other components that can enter appropriate recycling or recovery processes.
Scrap value is not the same as resale value. A unit should not be assigned a used-equipment price merely because its compressor or another major component is present.
Split AC Parts Recovery
Some units may fall between resale and scrap. For example, an AC that no longer cools may still contain components worth assessing individually. Whether parts recovery is practical depends on the unit’s condition, the components available and the applicable buying arrangement.
If you are unsure which category applies, share its details for assessment rather than choosing a selling route based on age alone.
How Much Is an Old Split AC Worth?
There is no single amount that applies to every model, capacity and condition. A working AC with complete indoor and outdoor units may be assessed differently from a unit with a damaged compressor or missing components.
- Brand and model: The exact model helps establish equipment type and reuse potential.
- Capacity: 1 ton, 1.5 ton, 2 ton — tonnage alone does not determine value.
- Working condition: Whether it starts, cools and operates normally.
- Compressor condition: A significant component that may affect the assessment.
- Indoor and outdoor units: Availability and condition of both matter.
- Copper and aluminium components: Recoverable materials contribute to scrap value.
- Age and appearance: Damage, corrosion, missing covers and deterioration.
- Collection requirements: Installed or already removed may affect arrangements and charges.
For a more relevant assessment, provide photographs, the brand, capacity, model if known, and a clear description of the AC’s condition.
Used Split AC Buyer for Working Air Conditioners
If your split AC still works, selling it for reuse may be worth exploring before considering scrap — particularly when replacing an AC due to renovation, a change in room requirements, or an upgrade to a newer model.
What to Include
- Approximate age
- Brand and capacity
- Operating condition
- Cooling issues, unusual noise or other faults if known
- Availability of both indoor and outdoor sections
What Helps the Assessment
- A complete unit with both sections is easier to assess than one with missing components.
- Photographs of both sections and the specification label help identify the model.
- The final resale offer (if available) depends on the buyer’s assessment and current demand.
- Do not assume the original purchase price or the brand alone establishes current market value.
Split AC Scrap Buyer for Damaged and Non-Working Units
A split AC that no longer functions can still be worth enquiring about — it does not switch on, fails to cool, has a damaged outdoor unit, or has developed a compressor or electrical fault.
In other cases the AC may have been left unused for years, or may be incomplete after a previous removal. When requesting a scrap assessment, explain the problem as clearly as possible. If the fault is unknown, say so — you do not need to diagnose the compressor, PCB or refrigerant circuit yourself.
The assessment may consider the condition of the major components, the available metals and the extent of any damage. A heavily damaged unit with missing parts may be valued differently from a complete nonworking AC.
Avoid dismantling the unit to recover metals yourself. Air conditioners contain electrical components and refrigerant systems that require appropriate handling.
Split AC Brands Accepted for Enquiry
Provide the actual brand and model where available so the equipment can be identified correctly.
Whirlpool and Toshiba split ACs are also accepted. The brand helps identify the equipment, but the assessment still depends on the actual unit — an older working split AC and a newer damaged model from the same manufacturer may have different resale prospects and scrap considerations. If the label is difficult to read, send a clear photograph of the specification plate. Do not guess the model if the information is uncertain.
Sell 1 Ton, 1.5 Ton and 2 Ton Split ACs
Capacity is useful information when requesting an assessment — but should always be considered alongside condition, model and components.
1 Ton Split AC
Share the model, condition and available components. The unit may be assessed for reuse, parts or scrap depending on its actual state.
1.5 Ton Split AC
A common residential category. If you are replacing one, mention whether it is still operational and whether the indoor and outdoor units are complete.
2 Ton Split AC
Provide the same information including brand, condition and model if available. Its capacity is useful but does not establish the final value.
Larger or Commercial Split ACs
Some commercial applications use larger-capacity split systems. If the equipment is part of a business installation, mention the quantity and whether other cooling equipment is included.
Sell Split ACs From Homes, Offices and Commercial Properties
Residential Split AC Selling
Homeowners and tenants may need to sell an old split AC after moving, renovating, or replacing an existing unit. Provide the AC details, location and whether the unit is still installed. If it has already been removed, mention whether the indoor and outdoor sections are both available.
Commercial Split AC Selling
Offices, shops, clinics and other businesses may have multiple ACs to sell after a refurbishment or equipment upgrade. Share the approximate quantity, capacities, brands and working condition. If the ACs are installed across multiple rooms or floors, explain the site requirements before collection is arranged.
Bulk Split AC Scrap
When a business is removing several ACs, each unit may have a different condition or capacity. A single description such as “old AC scrap” may not provide enough information for a meaningful assessment.
| Unit | Capacity | Brand | Condition | Installed? |
|---|---|---|---|---|
| Split AC #1 | 1.5 Ton | Voltas | Working | Yes |
| Split AC #2 | 1.5 Ton | Voltas | Not cooling | Yes |
| Split AC #3 | 2 Ton | Daikin | Nonworking | Yes |
| Split AC #4 | 1 Ton | LG | Removed, incomplete | No |
Prepare an equipment list if possible — include the number of units, approximate capacities, brand information, condition, and whether the equipment is still installed. For bulk requirements, confirm the buying arrangement, removal scope, payment terms and any applicable charges before proceeding.
Split AC Dismantling and Removal
Selling a split AC does not automatically mean that dismantling is included.
Typical System
An indoor unit, an outdoor unit, connecting pipework, electrical connections and other installation components.
Before Collection
Explain whether the unit is installed or already dismantled.
If Dismantling Is Needed
Confirm whether the service provider can arrange it, what the service includes, and whether separate charges apply.
Safety First
Do not cut refrigerant lines or disconnect the cooling circuit yourself.
Qualified Handling
Refrigerant recovery and technical removal should be handled by appropriately qualified personnel.
Commercial Sites
Removal may involve several units and additional access requirements — share site details before confirming a schedule.
How to Sell Your Split AC Through ScrapKabadi
The selling process starts with the details of your equipment.
Identify the AC
Note the type and brand. If model and capacity are visible on the specification label, include them.
Describe the Condition
State whether it works, has a known fault, or is completely nonfunctional.
Share Photographs
Images of the indoor unit, outdoor unit and model label help with initial identification.
Provide Location & Quantity
If the AC is installed, mention whether dismantling is required.
Discuss the Assessment
Confirm the value, collection availability, payment terms and any additional charges before agreeing.
This process helps establish whether the enquiry is better suited to resale, parts recovery or scrap.
What Information Should You Send for a Split AC Assessment?
Provide as many of the following details as you can.
- AC brand and model
- Capacity — 1 ton, 1.5 ton or 2 ton
- Approximate age, if known
- Working or nonworking condition
- Known faults or visible damage
- Availability of indoor and outdoor units
- Whether the AC is installed or removed
- Number of AC units
- Pickup location
- Photographs of the equipment and nameplate
You do not need every detail to begin an enquiry. If the model or capacity is unknown, share clear photographs and describe the condition.
Why Choose the Right Route for an Old Split AC
The main objective is to find an appropriate option for the equipment you have.
A working unit may deserve a resale assessment rather than an automatic scrap classification. A damaged AC may need a parts or material assessment instead of being treated like a complete working appliance.
Choosing the appropriate route can also help set realistic expectations about value, collection and the information required from you. ScrapKabadi provides an enquiry route for customers looking to discuss old AC selling requirements — the actual buying terms, assessment and service availability must be confirmed for the specific unit and location.
Split AC Frequently Asked Questions
Contact ScrapKabadi for Split AC Resale and Scrap
Have an old split AC to sell — working, damaged, outdated or no longer required? Share its details with ScrapKabadi to discuss the appropriate selling option. Provide the brand, capacity, working condition, quantity and pickup location. Add photographs if available, especially if the model is unknown or the AC has visible damage.
The unit can then be considered for the relevant resale, parts recovery or scrap enquiry, subject to assessment and service availability.